1. Try not to use truss robots 24 hours a day for operation Because any machine generates a large amount of heat during the operation process, after the truss manipulator has been working for a period of time, it is necessary to suspend the work of the CNC truss manipulator to release the heat generated by the CNC truss manipulator, in order to achieve the original intenti……
Safety protection device for truss manipulator 1. Braking device Generally, a braking device is installed at the joints of the truss manipulator to prevent the manipulator from rotating or loosening, and is used to stop the manipulator at the end of work. 2. Gas cut-off protection device The one-way valve and air storage tank are used to ensure that the ……
How to handle the fault problem of truss manipulator 1. Firstly, check if there are any alarm messages on the screen or text display screen of the truss manipulator. This is the most preliminary investigation. If there are any, it is necessary to find the cause of the fault based on the information. 2. Next is to inspect the mechanical part, but the most important point……
What problems should be checked for during regular daily maintenance of the frame manipulator 1. Pay attention to maintaining a working environment that meets the requirements: usually, the operating environment of the truss manipulator needs to maintain a suitable temperature in order to make the operation of the truss manipulator smoother; Avoiding operations in acidic a……
1.Intelligence replaces manual labor to improve work efficiency Nowadays, technology has become increasingly advanced, so the use of equipment should also keep up with the times and be more intelligent. The truss manipulator is designed as an intelligent device, allowing machines to replace manual work to improve overall work efficiency. And it can reduce the cost of labor……
